smartctl -a /dev/sdb
smartctl -t [short,offline,long] /dev/sdb
smartctl -l selftest
Karinas alte Festplatte (Backup Karina) Baujahr 2001 rum
=== START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family Device Model: ST3200021A Serial Number: 3LJ091PD Firmware Version: 3.01 User Capacity: 200,049,647,616 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Mon Apr 30 22:01:07 2012 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 063 051 006 Pre-fail Always - 146059820 3 Spin_Up_Time 0x0003 096 096 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2593 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 086 060 030 Pre-fail Always - 459228764 9 Power_On_Hours 0x0032 088 088 000 Old_age Always - 10871 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2629 194 Temperature_Celsius 0x0022 051 057 000 Old_age Always - 51 195 Hardware_ECC_Recovered 0x001a 063 051 000 Old_age Always - 146059820 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 10871 - # 2 Short offline Completed without error 00% 10870 -
Thomas Backup Baujahr JAN 2004
=== START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K250 Device Model: HDS722512VLAT80 Serial Number: VN343EC4C5NSAK Firmware Version: V33OA60A User Capacity: 123,522,416,640 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 3a Local Time is: Mon Apr 30 22:06:55 2012 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 060 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0007 143 143 024 Pre-fail Always - 227 (Average 190) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 618 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 2 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 18905 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 617 192 Power-Off_Retract_Count 0x0032 099 099 050 Old_age Always - 1375 193 Load_Cycle_Count 0x0012 099 099 050 Old_age Always - 1375 194 Temperature_Celsius 0x0002 203 203 000 Old_age Always - 27 (Lifetime Min/Max 14/48) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 2 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 18905 - # 2 Short offline Completed without error 00% 18905 -
Thomas neue Platte! Baujahr JUN 2007
=== START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint P80 series Device Model: SAMSUNG SP1654N Serial Number: S0GEJDPP601158 Firmware Version: BV100-50 User Capacity: 160,041,885,696 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a Local Time is: Mon Apr 30 23:01:19 2012 CEST Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 253 100 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 253 253 025 Pre-fail Always - 6016 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 35 5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline - 9980 9 Power_On_Hours 0x0032 253 253 000 Old_age Always - 101 10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 253 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 27 187 Reported_Uncorrect 0x0032 253 253 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 172 076 000 Old_age Always - 22 194 Temperature_Celsius 0x0022 172 076 000 Old_age Always - 22 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 1600 196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 253 253 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 3 200 Multi_Zone_Error_Rate 0x000a 253 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 100 000 Old_age Always - 0 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 102 - # 2 Short offline Completed without error 00% 100 -
Karinas neue Backup Platte? Baujahr DEC 2004
=== START OF INFORMATION SECTION === Model Family: Maxtor DiamondMax Plus 9 family Device Model: Maxtor 6Y160P0 Serial Number: Y47NYMGE Firmware Version: YAR41BW0 User Capacity: 163,928,604,672 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0 Local Time is: Tue May 1 08:45:58 2012 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 3 Spin_Up_Time 0x0027 205 204 063 Pre-fail Always - 12163 4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 61 5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail Always - 0 6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0 7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 0 8 Seek_Time_Performance 0x0027 251 249 187 Pre-fail Always - 43532 9 Power_On_Minutes 0x0032 234 234 000 Old_age Always - 233h+01m 10 Spin_Retry_Count 0x002b 253 252 157 Pre-fail Always - 0 11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 253 253 000 Old_age Always - 120 192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0 193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0 194 Temperature_Celsius 0x0032 253 253 000 Old_age Always - 12 195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 2358 196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline - 0 197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 0 198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0008 194 190 000 Old_age Offline - 15 200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 2 202 Data_Address_Mark_Errs 0x000a 253 252 000 Old_age Always - 0 203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 2 204 Soft_ECC_Correction 0x000a 253 252 000 Old_age Always - 0 205 Thermal_Asperity_Rate 0x000a 253 252 000 Old_age Always - 0 207 Spin_High_Current 0x002a 253 252 000 Old_age Always - 0 208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0 209 Offline_Seek_Performnce 0x0024 197 189 000 Old_age Offline - 0 99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 6362 - # 2 Short offline Completed without error 00% 6361 -
Thomas alte Laptop Festplatte
=== START OF INFORMATION SECTION === Model Family: Toshiba 2.5" HDD series (80 GB and above) Device Model: TOSHIBA MK8032GSX Serial Number: 36KS3781T Firmware Version: AS112D User Capacity: 78,518,522,880 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Tue May 1 09:34:17 2012 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 2 Throughput_Performance 0x0004 100 100 000 Old_age Offline - 0 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1875 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 2346 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 4 7 Seek_Error_Rate 0x000a 100 100 000 Old_age Always - 0 8 Seek_Time_Performance 0x0004 100 100 000 Old_age Offline - 0 9 Power_On_Hours 0x0032 016 016 000 Old_age Always - 33708 10 Spin_Retry_Count 0x0032 146 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2253 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 93 193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 1013638 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 31 (Lifetime Min/Max 7/60) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 4 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 13 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 8256 222 Loaded_Hours 0x0032 033 033 000 Old_age Always - 26986 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 322 240 Head_Flying_Hours 0x0000 100 100 000 Old_age Offline - 0 SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 33676 - # 2 Extended offline Aborted by host 90% 33675 - # 3 Short offline Aborted by host 90% 33675 - # 4 Short offline Completed without error 00% 33674 - # 5 Short offline Completed without error 00% 30183 - # 6 Short offline Completed without error 00% 9256 - # 7 Short offline Interrupted (host reset) 20% 7669 - # 8 Short offline Interrupted (host reset) 50% 4757 - # 9 Short offline Completed without error 00% 782 - #10 Short offline Completed without error 00% 0 -
Umzugskiste Festplatte 1
=== START OF INFORMATION SECTION === Model Family: Maxtor DiamondMax D540X-4K family Device Model: MAXTOR 4K060H3 Serial Number: 673120525938 Firmware Version: A08.1500 User Capacity: 60,040,544,256 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 5 ATA Standard is: ATA/ATAPI-5 T13 1321D revision 1 Local Time is: Wed May 9 17:10:20 2012 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0029 100 253 020 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 077 077 020 Pre-fail Always - 2926 4 Start_Stop_Count 0x0032 100 100 008 Old_age Always - 94 5 Reallocated_Sector_Ct 0x0033 100 100 020 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 023 Pre-fail Always - 0 9 Power_On_Hours 0x0012 053 053 001 Old_age Always - 31052 10 Spin_Retry_Count 0x0026 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 008 Old_age Always - 94 13 Read_Soft_Error_Rate 0x000b 100 100 023 Pre-fail Always - 0 194 Temperature_Celsius 0x0022 093 083 042 Old_age Always - 18 195 Hardware_ECC_Recovered 0x001a 012 002 000 Old_age Always - 60675271 196 Reallocated_Event_Count 0x0010 100 253 020 Old_age Offline - 0 197 Current_Pending_Sector 0x0032 100 100 020 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x001a 182 182 000 Old_age Always - 18 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 31052 - # 2 Short offline Completed without error 00% 31052 -
Irgendwann gestorben. Servo Error. Am 12.01.2019 wieder gefunden. War das nicht die Festplatte wo die VHS Videos drauf waren?
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-119-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Maxtor DiamondMax D540X-4K Device Model: MAXTOR 4K060H3 Serial Number: 673120525938 Firmware Version: A08.1500 User Capacity: 60,040,544,256 bytes [60.0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-5 T13/1321D revision 1 Local Time is: Sat Jan 12 16:57:59 2019 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: FAILED! Drive failure expected in less than 24 hours. SAVE ALL DATA. See vendor-specific Attribute list for failed Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 16) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 44) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 38) minutes. SMART Attributes Data Structure revision number: 11 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0029 100 253 020 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 077 076 020 Pre-fail Always - 2912 4 Start_Stop_Count 0x0032 099 099 008 Old_age Always - 1140 5 Reallocated_Sector_Ct 0x0033 001 001 020 Pre-fail Always FAILING_NOW 499 7 Seek_Error_Rate 0x000b 100 100 023 Pre-fail Always - 0 9 Power_On_Hours 0x0012 052 052 001 Old_age Always - 31775 10 Spin_Retry_Count 0x0026 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 099 099 008 Old_age Always - 1140 13 Read_Soft_Error_Rate 0x000b 100 001 023 Pre-fail Always In_the_past 0 194 Temperature_Celsius 0x0022 093 083 042 Old_age Always - 20 195 Hardware_ECC_Recovered 0x001a 003 002 000 Old_age Always - 89389201 196 Reallocated_Event_Count 0x0010 100 098 020 Old_age Offline - 0 197 Current_Pending_Sector 0x0032 100 074 020 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x001a 182 182 000 Old_age Always - 18 SMART Error Log Version: 1 ATA Error Count: 9963 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 9963 occurred at disk power-on lifetime: 31775 hours (1323 days + 23 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 d1 01 00 4f c2 e0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b0 00 01 00 4f c2 e0 00 00:00:16.702 SMART [Reserved subcommand] b0 00 01 00 4f c2 e0 00 00:00:16.626 SMART [Reserved subcommand] ec 00 01 00 00 00 e0 00 00:00:16.621 IDENTIFY DEVICE e5 00 00 00 00 00 e0 00 00:00:16.619 CHECK POWER MODE ec 00 01 00 00 00 e0 00 00:00:16.612 IDENTIFY DEVICE Error 9962 occurred at disk power-on lifetime: 31775 hours (1323 days + 23 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 d1 01 00 4f c2 e0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b0 00 01 00 4f c2 e0 00 00:00:16.626 SMART [Reserved subcommand] ec 00 01 00 00 00 e0 00 00:00:16.621 IDENTIFY DEVICE e5 00 00 00 00 00 e0 00 00:00:16.619 CHECK POWER MODE ec 00 01 00 00 00 e0 00 00:00:16.612 IDENTIFY DEVICE 20 04 04 04 e5 b3 e4 b3 00:00:16.525 READ SECTOR(S) Error 9961 occurred at disk power-on lifetime: 31775 hours (1323 days + 23 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 d1 04 04 e5 b3 e4 Error: ABRT at LBA = 0x04b3e504 = 78898436 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 20 04 04 04 e5 b3 e4 b3 00:00:16.525 READ SECTOR(S) 20 04 04 00 e5 b3 e4 b3 00:00:16.448 READ SECTOR(S) 20 04 08 00 e5 b3 e4 b3 00:00:16.363 READ SECTOR(S) ec 00 01 00 00 00 e0 00 00:00:16.356 IDENTIFY DEVICE ec 00 04 04 00 00 e0 00 00:00:16.350 IDENTIFY DEVICE Error 9960 occurred at disk power-on lifetime: 31775 hours (1323 days + 23 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 d1 04 00 e5 b3 e4 Error: ABRT at LBA = 0x04b3e500 = 78898432 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 20 04 04 00 e5 b3 e4 b3 00:00:16.448 READ SECTOR(S) 20 04 08 00 e5 b3 e4 b3 00:00:16.363 READ SECTOR(S) ec 00 01 00 00 00 e0 00 00:00:16.356 IDENTIFY DEVICE ec 00 04 04 00 00 e0 00 00:00:16.350 IDENTIFY DEVICE 20 00 04 04 00 00 e0 00 00:00:16.270 READ SECTOR(S) Error 9959 occurred at disk power-on lifetime: 31775 hours (1323 days + 23 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 d1 08 00 e5 b3 e4 Error: ABRT at LBA = 0x04b3e500 = 78898432 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 20 04 08 00 e5 b3 e4 b3 00:00:16.363 READ SECTOR(S) ec 00 01 00 00 00 e0 00 00:00:16.356 IDENTIFY DEVICE ec 00 04 04 00 00 e0 00 00:00:16.350 IDENTIFY DEVICE 20 00 04 04 00 00 e0 00 00:00:16.270 READ SECTOR(S) 20 00 04 00 00 00 e0 00 00:00:16.192 READ SECTOR(S) SMART Self-test log structure revision number 0 Warning: ATA Specification requires self-test log structure revision number = 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Abort offline test Aborted by host 00% 31775 - # 2 Short offline Completed: servo/seek failure 90% 31775 50922445 # 3 Short offline Completed: servo/seek failure 90% 31775 38800684 # 4 Extended offline Completed: servo/seek failure 70% 31764 41722283 # 5 Extended offline Completed without error 90% 31053 - # 6 Extended offline Completed without error 00% 31052 - # 7 Short offline Completed without error 00% 31052 - Selective Self-tests/Logging not supported
Papa D: Baujahr 2008
=== START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F1 RE series Device Model: SAMSUNG HE502IJ Serial Number: S1MTJ1EQ502794 Firmware Version: 1AA01112 User Capacity: 500,107,862,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 3b Local Time is: Wed May 9 19:34:42 2012 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 086 086 011 Pre-fail Always - 4990 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 54 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 15783 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 5 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 54 13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0033 100 100 099 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 082 059 000 Old_age Always - 18 (Lifetime Min/Max 18/18) 194 Temperature_Celsius 0x0022 080 059 000 Old_age Always - 20 (Lifetime Min/Max 18/20) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 188 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15783 - # 2 Extended offline Completed without error 00% 15800 -
Mama
=== START OF INFORMATION SECTION === Model Family: IBM Travelstar 48GH, 30GN, and 15GN Device Model: IC25N020ATDA04-0 Serial Number: 63L63MJ0883 Firmware Version: DA3OA76A User Capacity: 20.003.880.960 bytes [20,0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 5 ATA Standard is: ATA/ATAPI-5 T13 1321D revision 3 Local Time is: Sat May 12 14:12:40 2012 WS SMART support is: Available - device has SMART capability. SMART support is: Enabled ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0 3 Spin_Up_Time 0x0007 131 131 033 Pre-fail Always - 1 4 Start_Stop_Count 0x0012 099 099 000 Old_age Always - 2597 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0 9 Power_On_Hours 0x0012 066 066 000 Old_age Always - 15096 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 2209 191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 102 193 Load_Cycle_Count 0x0012 053 053 000 Old_age Always - 473281 194 Temperature_Celsius 0x0002 152 152 000 Old_age Always - 36 (0 50 255 255 0) 196 Reallocated_Event_Count 0x0032 098 098 000 Old_age Always - 372 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 10 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15096 - # 2 Extended offline Completed without error 00% 15017 -
Thomer Netbook Baujahr 2008
=== START OF INFORMATION SECTION === Device Model: Hitachi HTS543216L9A300 Serial Number: 081020FB2206LCHG7JTC Firmware Version: FB2OC40C User Capacity: 160,041,885,696 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 3f Local Time is: Sat May 26 23:54:50 2012 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0 3 Spin_Up_Time 0x0007 253 253 033 Pre-fail Always - 0 4 Start_Stop_Count 0x0012 099 099 000 Old_age Always - 1760 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0 9 Power_On_Hours 0x0012 084 084 000 Old_age Always - 7391 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1737 191 G-Sense_Error_Rate 0x000a 099 099 000 Old_age Always - 65538 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 106 193 Load_Cycle_Count 0x0012 001 001 000 Old_age Always - 1300369 194 Temperature_Celsius 0x0002 177 177 000 Old_age Always - 31 (Lifetime Min/Max 11/47) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 2 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 4 223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 7392 - # 2 Short offline Completed without error 00% 7391 -
Karinas neue Festplatte 1TB
smartctl 6.2 2013-07-26 r3841 [i686-linux-3.9-1-686-pae] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba 2.5" HDD MK..59GSM (AF) Device Model: TOSHIBA MK1059GSM Serial Number: Y1J6PUEHT LU WWN Device Id: 5 000039 3a24092aa Firmware Version: GU001U User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed May 14 15:17:11 2014 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 288) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 3695 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 791 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 472 10 Spin_Retry_Count 0x0033 115 100 030 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 638 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 256 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 98 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 2409 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 27 (Min/Max 14/41) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 8308 222 Loaded_Hours 0x0032 100 100 000 Old_age Always - 275 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 346 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 3 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 3 occurred at disk power-on lifetime: 455 hours (18 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 c7 58 1e b9 e8 Error: UNC 199 sectors at LBA = 0x08b91e58 = 146349656 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 1f 1e b9 e0 00 01:49:15.638 READ DMA EXT 25 00 00 1f 1d b9 e0 00 01:49:15.637 READ DMA EXT 25 00 80 9f 1c b9 e0 00 01:49:15.636 READ DMA EXT 25 00 80 1f 1c b9 e0 00 01:49:15.635 READ DMA EXT 25 00 08 17 1c b9 e0 00 01:49:15.635 READ DMA EXT Error 2 occurred at disk power-on lifetime: 455 hours (18 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 c7 58 1e b9 e8 Error: UNC 199 sectors at LBA = 0x08b91e58 = 146349656 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 1f 1e b9 e0 00 01:49:12.060 READ DMA EXT 25 00 00 1f 1d b9 e0 00 01:49:12.059 READ DMA EXT 25 00 00 1f 1c b9 e0 00 01:49:12.057 READ DMA EXT 25 00 00 1f 1b b9 e0 00 01:49:12.043 READ DMA EXT 25 00 00 1f 22 b9 e0 00 01:49:12.042 READ DMA EXT Error 1 occurred at disk power-on lifetime: 455 hours (18 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 c7 58 1e b9 e8 Error: UNC 199 sectors at LBA = 0x08b91e58 = 146349656 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 1f 1e b9 e0 00 01:49:08.393 READ DMA EXT 25 00 00 1f 1d b9 e0 00 01:49:08.392 READ DMA EXT 25 00 00 1f 1c b9 e0 00 01:49:08.391 READ DMA EXT 25 00 00 1f 1b b9 e0 00 01:49:08.388 READ DMA EXT 25 00 00 1f 1a b9 e0 00 01:49:08.387 READ DMA EXT SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Die Maxtor Platte als Ersatz für die mit den VHS Videos?
=== START OF INFORMATION SECTION === Model Family: Maxtor DiamondMax 10 (ATA/133 and SATA/150) Device Model: Maxtor 6L080P0 Serial Number: L22JCCKG Firmware Version: BAH41G10 User Capacity: 81,964,302,336 bytes [81.9 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 T13/1532D revision 0 Local Time is: Sat Jan 12 19:53:51 2019 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x05) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 841) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 32) minutes. SCT capabilities: (0x0021) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 3 Spin_Up_Time 0x0027 225 224 063 Pre-fail Always - 9822 4 Start_Stop_Count 0x0032 251 251 000 Old_age Always - 4084 5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail Always - 0 6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0 7 Seek_Error_Rate 0x000a 253 239 000 Old_age Always - 0 8 Seek_Time_Performance 0x0027 246 239 187 Pre-fail Always - 42657 9 Power_On_Minutes 0x0032 230 230 000 Old_age Always - 464h+57m 10 Spin_Retry_Count 0x002b 253 252 157 Pre-fail Always - 0 11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 243 243 000 Old_age Always - 4082 192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0 193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0 194 Temperature_Celsius 0x0032 039 253 000 Old_age Always - 23 195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 3789 196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline - 0 197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 0 198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age Offline - 0 200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 0 202 Data_Address_Mark_Errs 0x000a 253 238 000 Old_age Always - 0 203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 0 204 Soft_ECC_Correction 0x000a 253 252 000 Old_age Always - 0 205 Thermal_Asperity_Rate 0x000a 253 252 000 Old_age Always - 0 207 Spin_High_Current 0x002a 253 252 000 Old_age Always - 0 208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0 209 Offline_Seek_Performnce 0x0024 241 241 000 Old_age Offline - 154 210 Unknown_Attribute 0x0032 253 252 000 Old_age Always - 0 211 Unknown_Attribute 0x0032 253 252 000 Old_age Always - 0 212 Unknown_Attribute 0x0032 253 252 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 67 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 67 occurred at disk power-on lifetime: 4350 hours (181 days + 6 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 37 da 62 e0 Error: UNC 8 sectors at LBA = 0x0062da37 = 6478391 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 d8 08 37 da 62 e0 00 00:05:11.844 READ DMA c8 d8 08 37 da 62 e0 00 00:05:10.388 READ DMA c8 d8 08 6f 83 a9 e3 00 00:05:10.388 READ DMA c8 d8 08 77 83 a9 e3 00 00:05:10.388 READ DMA c8 d8 08 9f 42 5e e0 00 00:05:10.388 READ DMA Error 66 occurred at disk power-on lifetime: 4350 hours (181 days + 6 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 3f 00 60 e0 Error: UNC 8 sectors at LBA = 0x0060003f = 6291519 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 d8 08 3f 00 60 e0 00 00:04:50.246 READ DMA c8 d8 08 37 da 62 e0 00 00:04:48.723 READ DMA c8 d8 08 37 da 62 e0 00 00:04:47.267 READ DMA c8 d8 08 6f 83 a9 e3 00 00:04:47.267 READ DMA c8 d8 08 77 83 a9 e3 00 00:04:47.267 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 7029 - # 2 Extended offline Completed without error 00% 7028 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.